Properly maintaining your automatic garage doors will ensure that they have a longer lifespan and work when you need them to. If you are unsure about what to do, there are some preventative maintenance steps that you can take. These steps will need to be carried out regularly to ensure that your doors are always at their best.
Tighten The Hardware
Your garage door is going to be opening and closing hundreds of times each year. It is a lot of movement, and the motor will cause vibrations. Will create a loosening of the hardware that keeps your garage door in place.
It is one of the reasons why you need to take the time to tighten the hardware. The best place to start will be the roller brackets. You need to ensure that the bolts are tight and if they appear loose, you need to use a socket wrench to tighten them.
Test The Door Balance
If your door is not balanced correctly, the motor that opens it will have to work harder. The harder the motor has to work, the shorter its lifespan is going to be. It is easier to test the balance of the door than you might imagine.
You will need to disconnect the door opener which is generally done by pulling on the red cord attached to it. Once this has been done, you need to move the door to half open manually. When you leave the door, you need to note if it stays in this position.
If the door stays, the door is balanced. However, if the door does not remain in position, the counterweight system is not correctly stable. In this situation, you should call a garage door repairs northern beaches professional to balance the door as the adjustment can be tricky.
Lubricate The Moving Parts
Keeping all of the moving parts in the door, greased will make a big difference in how the system operates. The best thing about this maintenance step is that it only takes around 10 minutes. You also have to do this less regularly than you might imagine.
When lubricating the parts, you should use white lithium grease on the chain and screws. For the overhead springs, you need to use a spray lubricant that will coat the springs thoroughly. If you are unsure about the oil to use, you will generally be able to get the right ones from your local garage door specialist.
Clear The Tracks
The tracks on either side of the door will also need to be cleaned regularly. Debris can cause problems for the rollers and will pull the door out of balance. However, when you are cleaning the tracks, you need to be careful and not move them at all because this will cause problems that a professional will need to look at.
There are a lot of maintenance steps that you can take to ensure your automatic garage doors work correctly. If you are unsure about handling this, you should contact a professional to help instead.